Samsung NP10 Swap a Flex-BayDevice - Power Off, Device Swap, To remove a device with the power off proceed as follows:

5.Slide the device out.

6.Slide the new device in

7.Click OK. The message “Please wait until the system processes the device change” appears again.

8.Click OK to close the Softex Bay Manager Utility.

Swap a Flex-Bay Device - Power Off

Device Swap

To remove a device with the power off proceed as follows:

1.Turn the computer’s power off.

2.Tilt the computer up & locate the smart bay latch.

3.Slide and hold the device latch toward the rear of the computer.

4.Slide the device out.

5.Carefully slide the new device into the bay.

6.Push the device in until it is flush with the chassis and the Flex-Bay latch snaps into place. Your computer’s operating system automatically recognizes the device in the Flex-Bay and configures your computer accordingly when power is restored.

Using the Flex-Bay 31