ASSEMBLE THE FREEZER DRAWER
To reattach the freezer drawer, assemble parts in reverse order.
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make fi nal adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
Insert a fl
1.If you open the drawer 1 , you can see the lower hinge 2 .
2.Insert a philips screwdriver (+) 3 into the shaft 4 of the lower hinge.
3.Adjust the height by turning a philips
screwdriver (+) 3 clockwise (
counterclockwise (
(2)
(1)
(3) | (3) |
|
When you turn a philips screwdriver (+)
counterclockwise (
Both control levers must be touching the
CAUTION fl oor to avoid possible personal injury or property damage because of tipping.
If the right side is lower, perform the same procedure, but with the right control lever.
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.
ADJUSTING THE FREEZER DRAWER LEVEL
Adjustment part | Freezer Drawer |
When the left | When the |
door is lower | left door is |
than the right | higher than |
door. | the right |
| door. |
Adjustment part
Adjustment part
Setting up _17
2017. 7. 26. 3:27 |