Samsung SCC-B2005P IRIS, ❿DC, ❿ELC, ❿VIDEO

IRIS

EThis CAMERA has an IRIS function for automatic control of the brightness level through the intensity of radiation. The ALC can select the DC IRIS level, VIDEO IRIS, and ELC LEVEL.

❿DC...

If you select the DC menu and press the [ENTER] key, the sub-screen

will appear to set the brightness level. Here, you are able to set the brightness level by pressing the LEFT or RIGHT key in the LEVEL

menu. Level setting is available only by using the DC IRIS lens.

Then, you shall puts the ALC LENS selection switch on the side of the camera in the “DC” position.

CAMERA ID	ON...		(IRIS/DC)
IRIS	DC...
BLC/WDR	OFF
COLOR/BW	COLOR
SHUTTER	OFF	press the
AGC	OFF
		[ENTER] key
WHITE BAL	ATW
SYNC	INT
SPECIAL	...		LEVEL	(0) - - - - I - - - -
EXIT	QUIT		RET

22

❿VIDEO

It is used while the VIDEO lens is in use. You shall use the variable

resistor attached to the IRIS LEVEL LENS for the control. Then put the E ALC LENS selection switch on the camera side in “VIDEO” position.

CAMERA ID	OFF
IRIS	VIDEO
BLC/WDR	OFF
COLOR/BW	COLOR
SHUTTER	OFF
AGC	OFF
WHITE BAL	ATW
SYNC	INT
SPECIAL	...
EXIT	QUIT

❿ELC...

This menu controls the High Speed Shutter Level within a limited range in the event of too intensive radiation from outside while using the Manual Lens. If you select the ELC in the IRIS menu and press the [ENTER] key, the following subscreen will appear. Here, you are able to set the level by pressing the LEFT or RIGHT key.

CAMERA ID	ON...		(IRIS/ELC)
IRIS	ELC...
BLC/WDR	OFF
COLOR/BW	COLOR
SHUTTER	OFF	press the
AGC	OFF
		[ENTER] key
WHITE BAL	ATW
SYNC	INT
SPECIAL	...		LEVEL	( 0 ) - - - - I - - - -
EXIT	QUIT		RET

23