User Guide
4. Installation
■Check what is inside the package
•Check to see if the following parts are included in the purchased package.
Camera | tab screw | User's guide |
■Notes on installation and usage
1.Users should not disassemble the camera from the front direction.
2.Always handle the camera with care. Please do not apply a shock or vibration as much as possible and take cautions not to cause damage or make a scratch on the camera due to careless storage.
3.Please do not install the camera with the rainy place or highly humid areas. And do not operate the camera in the wet place.
4.Do not clean the camera body with the strong abrasives or soaps. When the camera becomes
dirty, clean it with the dry rugs. Especially, make sure to use the dedicated rugs for lens to clean the dome cover.
5.Please keep the camera at the cool area that is not exposed to the direct sunlight. If you do, it can cause bad effects on the product.
User Guide
■Cable connection
1.Hold the camera body with one hand and turn the dome cover counterclockwise with other hand in order to disassemble it.
E
2.Connect the BNC cable to the video cable connector attached on the dome camera, and connect the remained BNC cable to the video input terminal of the monitor.
3.Connect the power adaptor at this time. Connect the DC 12V/AC 24V power cable of the connector to the power cable connection that is attached on the dome camera.
Monitor
BNC Cable
6 | 7 |