| Issues | Solutions and Explanations |
|
|
|
|
|
| A “Mode Not Supported” | •• Check the supported resolution of the TV, and adjust the external |
|
| message appears. | device’s output resolution accordingly. |
|
|
|
|
|
| There is a plastic smell from the | •• This smell is normal and will dissipate over time. |
|
| TV. |
|
|
|
|
|
|
| The TV Signal Information is | •• This function is only available with digital channels from an Antenna / RF/ |
|
| unavailable in the Self Diagnostic | Coax connection. |
|
| menu. |
|
|
|
|
|
|
| The TV is tilted to the side. | •• Remove the base stand from the TV and reassemble it. |
|
◀ |
|
| ▶ |
The channel menu is greyed | •• The Channel menu is only available when the TV source is selected. | ||
| out. (unavailable) |
|
|
|
|
|
|
| Your settings are lost after 30 | •• If the TV is in the Store Demo mode, it will reset audio and picture |
|
| minutes or every time the TV is | settings every 30 minutes. Change the settings from Store Demo mode |
|
| turned off. | to Home Use mode in the Plug & Play (Initial setup) procedure. Press |
|
|
| the SOURCE button to select TV mode, and go to MENU → System → |
|
|
| Plug & Play (Initial setup) → ENTERE. |
|
English