You can have the vacuum cleaning robot return to the charger to charge the battery by using the Recharging button.
■ When the vacuum cleaning robot is operating, press the (
1.Press the Recharging button.
- (“
2.To stop the vacuum cleaning robot while it is returning to the charger,
press the (
3. To test the auto charge function, press the Recharging button when the vacuum cleaning robot is less than 1.5m from the charger.
Using the remote
control
-Check the installation of the charger
-When the charger is in a location where the charger cannot guide the vacuum cleaning robot to the charger.
-When the charger is more than 5m away from vacuum cleaning robot.
: It may require a longer time for the vacuum cleaning robot to return to the charger.
■Manually charge the vacuum cleaning robot in the following cases. - When the charger is installed in a corner.
- When the battery is fully discharged.
- When the vacuum cleaning robot is trapped by an obstacle (furniture etc.)
- When the vacuum cleaning robot cannot pass over the doorsill to the location where the charger is installed.
Using the main unit
buttons
operating _29