Symptom | Checklist |
| Measure to Take |
|
|
|
|
| |
The vacuum cleaning | • Check whether the autoemptier | • Turn on the power switch on the |
| |
robot frequently |
|
| left side of the autoemptier. |
|
collides with the |
|
|
|
|
| • Plug the power plug into the outlet. |
| ||
autoemptier. |
| 05 | ||
|
|
| ||
The | • Check whether there is a foreign | • | Clean the fi lter. | TROUBLESHOOTING |
does not empty | substance on the fi lter. |
|
| |
|
|
| ||
the dustbin |
|
|
|
|
• Check whether there is a foreign | • Remove the foreign substance |
| ||
automatically. |
| |||
substance inside the dustbin. |
| from the inside of the dustbin. |
| |
|
|
| ||
|
|
|
| |
| • The bottom of the autoemptier is | • Open the bottom of the auto- |
| |
| clogged. |
| emptier using a coin and then |
|
|
|
| remove the dust clogging it. |
|
|
|
|
| |
| • Check whether the dustbin | • Close the dustbin cyclone cap. |
| |
| cyclone cap exists. |
|
|
|
|
|
|
| |
| • Check whether the auto empty | • Press the Auto Empty On/Off |
| |
| lamp of the |
| Select button on the |
|
| on. |
|
|
|
|
|
|
| |
| • Check whether the dustbin is | • Turn off the |
| |
| separated from the autoemptier. |
| insert the dustbin fully until it is |
|
|
|
| mounted completely. |
|
|
|
|
| |
| • Check whether the fi lter is | • Turn off the |
| |
| separated from the autoemptier |
| mount the fi lter onto the dustbin. |
|
| dustbin. |
|
|
|
|
|
|
| |
| • Check whether the Power | • Remove any foreign substances |
| |
| Brush wrapped in any foreign |
| such as long hairs or strings |
|
| substances. |
| wrapped around the power brush. |
|
The suction power of | • Check whether the Full lamp is | • | Empty the dustbin. |
|
the | turned on. | • Clean the air inlet of bottom. |
| |
week. |
|
|
|
|
• Check whether the air inlet is | • Remove the foreign substance |
| ||
|
| |||
| clogged by a foreign substance. |
| from the air inlet. |
|
|
|
|
|
|
| • Check whether dust has collected | • | Clean the fi lter. |
|
| on the fi lter. |
|
|
|
|
|
|
| |
| • Check whether dust or hairs have | • Open the cyclone cap and then |
| |
| collected on the cyclone. |
| remove any dust and hair. |
|
The vacuum cleaning | • Check whether there is a foreign | • Remove the foreign substance |
| |
robot is not charged. | substance on the charging |
| from the charging terminals. |
|
| terminals. |
| Turn on the power switch of the |
|
|
|
|
| |
|
|
|
|
|
| • Check whether the autoemptier is |
|
|
|
| turned on. |
|
|
|
|
|
|
|
|
troubleshooting _49