Samsung SR8987 VCR8987L3R/SWS, VCR8988L3K/SWS Spot Cleaning, _31, button

Spot Cleaning

You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc.

■Move the vacuum cleaning robot to the location where you want to perform a spot clean.

About 1.5m

About 1.5m

OPERATING 03

Main unit button	Remote control	Configuration
	button	Sequence
	1.	Set the mode.
▶
2time
	2.	Cancel the mode.

Normal Mode

-In Spot cleaning mode, the vacuum cleaning robot cleans an area with a length of 1.5m and a width of 1.5m.

-When cleaning is completed, the vacuum cleaning robot will display End, Stop, and Stand by.

When the vacuum cleaning robot is docked with the charger NOTE station, spot cleaning is not supported.

• Each time you press the Turbo button, the Turbo icon on

CAUTION the display panel is turned on or off sequentially. When the Turbo icon is turned on, you can start cleaning in Turbo

mode.

•Each time you press the Dust Sensor button, the Dust Sensor icon on the display panel is turned on or off sequentially. When the Dust Sensor icon is turned on, you can start cleaning in Dust Sensor mode.

Turbo Mode

Dust Sensor Mode

Cleaning Complete

operating _31