Error codes
1 Below error codes appear on the display panel
2 Turn off the emergency switch and check the below instructions and take appropriate action
3 Error code will disappear when you turn on the emergency switch
Error codes | Checklist |
▶▶Turn off the emergency switch and remove the foreign matter from the Power brush.
Foreign matter caught in the left Driving wheel.▶▶Turn off the emergency switch and remove the foreign matter from the Driving wheel.
Foreign matter caught in the right Driving wheel.▶▶Turn off the emergency switch and remove the foreign matter from the Driving wheel.
Bumper sensor needs to be checked.▶▶Turn off the emergency switch and turn it back on.
▶▶Contact a service center if error code does not disappear.
Foreign matter accumulated on the obstacle sensor.▶▶Turn off the emergency switch and clean the front and rear sensor with a soft cloth.
Foreign matter accumulated on the cliff sensor.▶▶Turn off the emergency switch and clean the cliff sensor with a soft cloth.
Battery malfunction or wire disconnected.▶▶Turn off the emergency switch and turn it back on.
▶▶Contact a service center if error code does not disappear.