1. Manuals
  2. Brands
  3. Laundry Appliance
  4. Washer
  5. Samsung
  6. Laundry Appliance
  7. Washer

Samsung WA186DSHASU/YL manual 29

1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 72
Download on canonical page 72 pages, 0 b

PROBLEM

SOLUTION

Fills with the wrong

Turn both faucets on fully.

temperature water.

Make sure the temperature selection is correct.

 

 

Make sure the hoses are connected to the correct faucets.

 

Flush water lines.

 

Disconnect the hoses and clean the screens. The hose filter screens

 

may be plugged.

 

As your Washer is filling, the water temperature may change as

 

the automatic temperature control feature checks incoming water

 

temperature. This is normal.

 

While your Washer is filling, you may notice just hot and/or just

 

cold water going through the dispenser when you have selected

 

cold or warm wash temperatures. This is a normal function of the

 

automatic temperature control feature as your Washer determines the

 

temperature of the water.

Door locked or will not

Press the Start/Pause Button to stop your Washer.

open.

It may take a few moments for the door lock mechanism to

 

 

disengage.

Does not drain and/or spin.

Check the fuse or reset the circuit breaker.

 

Straighten the drain hoses. Eliminate kinked hoses. If there is a drain

 

restriction, call for service.

 

Close the door and press the Start/Pause Button. For your safety,

 

your Washer will not spin unless the door is closed.

Load is too wet at the end

Use the High or Extra High spin speed.

of the cycle.

Use high efficiency detergent to reduce over–sudsing.

 

 

The Load is too small. Very small loads (one or two items) may

 

become unbalanced and not spin out completely.

Leaks water.

Make sure all hose connections are tight.

 

Make sure the end of the drain hose is correctly inserted and secured

 

to the drainage system.

 

Avoid overloading.

 

Use high efficiency detergent to prevent over–sudsing.

Has excessive suds.

Use high efficiency detergent to prevent over-sudsing.

 

Reduce the detergent amount for soft water, small or lightly soiled

 

loads.

 

Non-HE detergent is NOT recommended.

 

 

troubleshooting 05

troubleshooting _29

WA186DSHASU-02703E_EN_130131.indd Sec10:29

2013-01-31 ￿￿ 5:57:40

MENU

Models

Contents