Combine with an existing washing machine by sharing one water tap
1.Disconnect the water supply hose (A) from the existing washing machine.
A
2.Connect the inlet T adaptor (B) to the inlet hole (C) of the existing washing machine.
B
C
3.Connect the disconnected water supply hose (A) to the inlet T adaptor (B).
A
B
4.Connect the water supply hose (D) for the sanitizing
washing machine to the inlet hole of the sanitizing washing machine.
(*): applicable models only
D
5.Connect the water supply hose to the inlet T adaptor as shown, and turn it clockwise to tighten. It fits with a clicking
sound.
(*): Rubber ring
To avoid water leaks, make sure the rubber ring is secured around the T adaptor.
CAUTION: When finishing washing the laundry, close the water tap. Otherwise, this may cause the following:
•If the water tap is not closed or not connected properly, water may leak especially in winter.
•If the water tap is not closed, the supplied water may freeze inside the water hose.
•The water tap or hose could burst at a low temperature.
English - 12
|
| ||
|
| ||
|
|
|
|