Samsung WF520ABP/XAA washing a load of laundry, Steam, Steam, My cycle, My Cycle, My Cycle, Turn the, Deep Steam, Cycle Selector, 1.Load the washer, 2.Press the Power button

washing a load of laundry

My cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button convenience.

By pushing the My Cycle button, you activate the settings used during the My Cycle mode.

The “My Cycle” light will indicate activation.You can select all options as follows in “My Cycle” mode.1.Select cycle using the Cycle Selector dial.2.After cycle selection, set each option. See page 38 for available option settings with each cycle.

3.Then, you can start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode. The cycle and options you select will be displayed the next time you choose “My Cycle”.

You can change the “My Cycle” settings by repeating the same process above.The last used setting will be displayed the next time you choose “My Cycle”.Steam

If you select steam, the steam acts at the most effective times for the detected amount of laundry, maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and improving wash performance.

1.Load the washer.2.Press the Power button.

3.Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically selects the Steam Wash function.)

4.Press the Steam button.

5.Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line.

6.Press the Start/Pause button.

: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.

Steam may not necessarily be visible during the steam cycles. Steam may not be present during the entire steam wash cycle.

24_ washing a load of laundry

WF520AB-02838B-08_EN.indd Sec5:24 2012-05-11 ￿￿ 3:34:03