maintaining your washer
CLEANING THE DEBRIS FILTERWe recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.
1.Open the filter cover by pressing and pulling the handleof the filter cover with your finger. | Filter cover |
|
2.Holding the drain cap, pull the drain tube that is hooked on the guide hook to the front.Do not pull the drain tube with excessive force.
3.Place a bowl under the washing machine to catch any remaining water. Then, hold the drain tube with one hand, and turn the emergency drain cap counter clockwise with the other hand to separate it from the drain tube.
4.Drain the remaining water completely.Step 1 | Step 2 |
Drain cap
Debris filter cap
6. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.
Debris filter | Debris filter | |
cap | ||
|
cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o’clock position, pointing to the indicator on the washer.
8.