washing a load of laundry
My cycleAllows you to activate your custom wash (temperature, spin, soil level, etc.) with
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The “My Cycle” light will indicate activation.
You can select all options as follows in “My Cycle” mode.
1.Select cycle using the Cycle Selector dial.
2.After cycle selection, set each option.
See page 38 for available option settings with each cycle.
3.Then, you can start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode. The cycle and options you select will be displayed the next time you choose “My Cycle”.
You can change the “My Cycle” settings by repeating the same process above.
The last used setting will be displayed the next time you choose “My Cycle”.
SteamThe Steam Wash function injects steam directly into the laundry in the wash tub to increase the wash temperature and enhance the soak effect, thus improving the wash performance.
1.Load the washer.
2.Press the Power button.
3.Turn the Cycle Selector and select a steam cycle. (The Deep Steam cycle automatically selects the Steam Wash function.)
4.Press the Steam button.
5.Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line.
6.Press the Start/Pause button.
: The washer automatically selects the optimal wash conditions by sensing the weight of the laundry.
If steam wash is selected, steam is injected at the most effective time for the detected amount of laundry in order to maximize the effect of the steam.
24_ washing a load of laundry
|
| ||
|
| ||
|
|
|
|