maintaining your washer
Cleaning the debris filter
We recommend cleaning the debris filter when water does not drain well or the “nd” error message is displayed.
1. Open the filter cover by pressing and pulling the handle | Filter cover | |
of the filter cover with your finger. | ||
|
2. Holding the drain cap, pull the drain tube that | Step 1 | Step 2 | |
is hooked on the guide hook to the front.Do | |||
|
| ||
not pull the drain tube with excessive force. |
|
| |
3. Place a bowl under the washing machine |
|
| |
to catch any remaining water. Then, hold | Drain cap |
| |
the drain tube with one hand, and turn the |
|
| |
emergency drain cap counter clockwise with |
|
| |
the other hand to separate it from the drain |
|
| |
tube. |
|
|
4. Drain the remaining water completely.
5.Pull out the debris cap and debris filter assembly.
Debris filter cap
6.Wash any dirt or other material from the
debris filter. Make sure the drain pump propeller behind the debris filter is not blocked.
Debris filter | Debris filter | |
cap | ||
|
7.When you have finished cleaning the filter, insert the debris
cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o’clock position, pointing to the indicator on the washer.
8.
then hook the tube to the hook guide.
9.
30_ maintaining your washer
|
| ||
|
| ||
|
|
|
|