3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*).
C
4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
C
6. While holding down part (D), connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound.
D
7. If you are using a screw type of water tap, use the provided
Installation
English 21
|
| ||
|
| ||
|
|
|
|