127
Copying, moving, or initializing a channel
LS9-16/32 Owner’s Manual
12
Grouping and linking
The settings of a specific input channel can be moved to a
different input channel. When you execute a Move opera-
tion, the numbering of the channels between the move-
source and move-destination will move forward or back-
ward by one.
You can move settings between the following combina-
tions of channels.
• Between INPUT channels
• Between ST IN channels
1In the DISPLAY ACCESS section, press the
[CHANNEL JOB] key repeatedly to access
the CH MOVE screen of the CHANNEL JOB
screens.
1SOURCE CH field
This indicates the move-source channel.
BCLEAR SOURCE button
This button clears the channels shown in the SOURCE
CH field and DESTINATION CH field.
CDESTINATION CH field
This indicates the move-destination channel.
DCLEAR DEST button
This button clears all channels shown in the DESTI-
NATION CH field.
EMOVE button
Executes the move.
2
To select the move-source channel, press
the corresponding [SEL] key to make it light.
The corresponding channel is highlighted in the
SOURCE CH field of the window.
When you select the move-source channel, the DES-
TINATION CH field will automatically be embold-
ened, allowing you to select the move-destination.
If you want to re-select the move-source channel,
move the cursor to the CLEAR SOURCE button and
press the [ENTER] key.
3To select the move-destination channel,
press the corresponding [SEL] key to make
it light.
The corresponding channel is highlighted in the DES-
TINATION CH field of the window. The channels that
can be selected will depend on the channel you
selected in step 2.
If you want to re-select the move-destination channel,
move the cursor to the CLEAR DEST button and press
the [ENTER] key.
4To execute the Move operation, move the
cursor to the MOVE button and press the
[ENTER] key.
The settings of the move-source channel will be
moved to the move-destination. The settings of all
channels between the move-source and move-destina-
tion will be moved by one channel in the direction of
the move-source. When the Move has been executed,
the SOURCE CH field and DESTINATION CH field
will return to an un-set state.
Moving the parameters of a chan-
nel
1 2 3 4 5
1 5 2 3 4
Move
Move by one
2
54
3
1
•Settings for the Move operation can be made only in the order
of “move-source”
→
“move-destination.”
NOTE