133
Using scene memories
LS9-16/32 Owner’s Manual
13
Scene memory
2Move the cursor to the USER DEFINED
KEYS button and press the [ENTER] key to
access the USER DEFINED KEYS popup
window.
The USER DEFINED KEYS popup window lets you
assign functions to user defined keys [1]–[12].
3Move the cursor to the popup button for the
user-defined key to which you want to
assign a function, and press the [ENTER]
key.
The USER DEFINED KEY SETUP popup window
will appear.
4Move the cursor to the FUNCTION column,
and use the dial or the [DEC]/[INC] keys to
select “SCENE.”
In this popup window, you will proceed as follows
depending on the function you want to assign.
●To assign INC RECALL or DEC RECALL
Move the cursor to the PARAMETER 1 column, and
use the dial or the [DEC]/[INC] keys to select “INC
RECALL” or “DEC RECALL.”
●To assign DIRECT RECALL
Move the cursor to the PARAMETER 1 column, use
the dial or the [DEC]/[INC] keys to choose “DIRECT
RECALL,” and then choose “SCENE #xxx” (xxx is
the scene number) in the PARAMETER 2 column.
5When you’ve finished making settings,
move the cursor to the OK button and press
the [ENTER] key to close the popup win-
dow.
If desired, assign scene-recall functions to other user-
defined keys in the same way.
6Press the user-defined key to which you
assigned a recall function.
The corresponding scene will be recalled.
User defined keys popup buttons