Fisher & Paykel BGB48 manuals

Fisher & Paykel BGB48 Installation Instructions

48 pages1.9 Mb

WARNING!
WARNING
DANGER
3A MESSAGE TO OUR CUSTOMERS
4TABLE OF CONTENTS
- 5IMPORTANT SAFETY NOTICE!
  - WARN ING
- WARNING!
- WARNING:IMPORTANT!
  - 5
  - 7GRILL PLACEMENT
    - Tools required: Phillips screwdriver.
    - Gas fittings, regulator, and installer supplied shut-off valves must be easily accessible.
  - 10LOCATION:
  - GRILL PLACEMENT
  - 12Clearances to Non-Combustible Construction*
  - Clearances to Non-Combustible Construction*:
  - Clearances to Combustible Construction**:
  - 13GENERAL
  - INSULATED JACKET:
  - Clearances to Combustible Construction**
    - Note specific built-in enclosure ventilation requirements. See text and Fig. 10.
    - Standard layout for non-combustible enclosure:
    - Layout for insulated jacket only - combustible enclosure:
      - FIG. 10
  - 14BUILTIN CONSTRUCTION DETAILS
    - 15GAS REQUIREMENTS
    - NATURAL GAS HOOK UP:
      - THIS TYPE OF CONNECTION SHOULD BE PERFORMED BY A CERTIFIED OR LICENSED GAS FITTER ONLY.
    - 16NATURAL GAS HOOK UP CONT:
    - CHECKING THE GAS PRESSURE
    - LPG GAS HOOK UP
    - LPG CYLINDER REQUIREMENTS:
    - Note:
- 17 WARNING :
  - 18LPG CYLINDER RESTRAINT FOR BUILT-IN INSTALLATION
  - NOTE:
  - 457mm max.
  - GENERAL:
  - Before Testing:
  - To Test:
    - Do not use the grill until all connections have been checked and do not leak.
  - 20LEAK TESTING -- PROCEDURE FOR A QUALIFIED GAS FITTER
    - GRILL BURNER AIR ADJUSTMENT:
    - GRILL BURNER FLAME HEIGHT:
    - To Adjust:
    - LOW FLAME SETTING ADJUSTMENT:
    - To Adjust:
    - SIDE BURNER FLAME HEIGHT:
- 21WARNING: IMPORTANT!
  - BURNER ADJUSTMENT
    - RADIANT ASSEMBLY INSTALLATION:
    - INSTALLING THE GREASE SHIELDS
  - 22RADIANT ASSEMBLY
  - 23GRIDDLE PLATE
    - Griddle plate to be fitted to centre burner positions only
    - Remove griddle plate only when completely cooled
  - 25INSTALLER CHECKLIST
    - BEFORE USING YOUR GRILL, CHECK THAT ALL PACKAGING HAS BEEN REMOVED. TO LIGHT THE GRILL BURNER:
    - Grill Match Lighting:
    - TO LIGHT SIDE BURNERS (48BQR MODELS ONLY):
      - The side burner cover may be hot if the grill burners are in operation.
    - Side Burners Lighting Instructions:
    - Side Burners Match Lighting:
    - Note:
    - Side burners:
  - 26LIGHTING INSTRUCTIONS
    - IMPORTANT
  - 27GRILLING
  - 28GRILLING (Continued)
    - Never cook food with all grill burners on
    - Note:
    - GRILLING HINTS:
    - DUAL-SIDED GRATES:
  - 29GRILLING
    - W-SHAPED GRATE RADIUS GRATE
    - 31PREPARATION Recommended:
    - Working Area:
    - Meat Preparation:
    - 32TO LIGHT THE ROTISSERIE BURNER BEFORE COOKING:
    - MANUAL LIGHTING:
    - 33COOKING ON ROTISSERIE
      - The fork rods are very sharp. Keep hands away from tips when removing the food.
- 35LEAK TESTING PROCEDURE FOR THE USER
  - IMPORTANT!
  - When to check for leaks
  - Before leak testing
  - To test
  - IMPORTANT!
  - BATTERY REPLACEMENT:
  - REGULATOR AND HOSE REPLACEMENT
- 36WARNING: IMPORTANT!
  - GRILL GRATES:
  - 37CERAMIC RODS:
  - HEAT SHIELDS:
    - shield
  - 38GREASE TRAY
  - DRIP PAN
  - To remove and replace the drip pan and grease tray for cleaning
  - 40STAINLESS STEEL:
  - Note:
  - SIDE BURNER IGNITORS:
  - TO REMOVE THE GRILL BURNERS FOR CLEANING
  - 41GRILL BURNER CLEANING:
  - INJECTOR CLEANING:
  - TO REPLACE THE GRILL BURNERS AFTER CLEANING
  - 42SIDE BURNER GRATES (BGB48 BQR MODEL):
  - SIDE BURNERS (BGB48 BQR MODEL):
43TROUBLESHOOTING
- BEFORE CALLING FOR SERVICE:
- GRILL WONT LIGHT WHEN THE IGNITION BUTTON IS PUSHED:
- BURNER FLAME IS YELLOW OR ORANGE, IN CONJUNCTION WITH THE ODOUR OF GAS:
- LOW HEAT WITH KNOB IN HI/SEAR POSITION:
- ROTISSERIE WONT LIGHT:
- ROTISSERIE LIGHTS, BUT WILL NOT HOLD FLAME ONCE BUTTON IS RELEASED:
44SERVICE
45WARRANTY
46WARRANTY (continued)