Linear AM-KPI manuals

Household Appliance > Door

When we buy new device such as Linear AM-KPI we often through away most of the documentation but the warranty. Very often issues with Linear AM-KPI begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Door Linear AM-KPI is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Door on our side using links below.

Linear AM-KPI Installation Instructions

2 pages1016.23 Kb

AM-KPI
- Access Control Keypad
  - 3. OPEN THE KEYPAD 4. CUSTOMIZE THE BEZEL (OPTIONAL) 5. INSTALL WALL BOX & MOUNTING PLATE
  - Installation Instructions
    - 1. INTRODUCTION
    - 2. KEYPAD FEATURES
    - 6. ROUTE THE CABLE 7. CONNECT THE CABLE & SET THE DEVICE ADDRESS 8. MOUNT THE KEYPAD
    - 9. PROGRAM THE SYSTEM 10. TEST THE KEYPAD LINEAR LIMITED WARRANTY
    - FCC NOTICE
      - GND
      - DAT1
      - DAT0
      - DVAL
        (1000 FEET WIRE MAXIMUM ALLOWED IN THE SYSTEM)
      - TO PROTECT THE KEYPAD FROM STATIC DISCHARGES, BE SURE EARTH GROUND IS CONNECTED TO THE CONTROLLER
    - 2CAUTION
      - SET THE DEVICE ADDRESS SWITCH
      - EACH REMOTE DEVICE MUST BE SET TO A UNIQUE NUMBER FROM 1 TO 6
      - ARROW ON SWITCH SLOT POINTS TO THE NUMBER
        FOLLOW THIS WIRING DIAGRAM TO CONNECT THE KEYPAD TO THE CONTROLLER
        AM-KPI TERMINALS PCLK
        PWR GND DAT1 DAT0 DVAL PCLK
        PWR ACCESS CONTROL SYSTEM PBUS TERMINALS
        HOOK THE KEYPAD ASSEMBLY ONTO THE MOUNTING PLATE
        INSTALL THE TWO SCREWS
        FIT THE BOTTOM TAB OF THE FACEPLATE INTO THE SLOT ON THE KEYPAD
        SNAP THE TOP OF THE KEYPAD INTO PLACE
        PROGRAM THE CONTROLLER TO CONFIGURE THE PBUS DEVICE
        REFER TO THE CONTROLLER PROGRAMMING INSTRUCTIONS FOR DETAILS
        THE YELLOW INDICATOR LIGHTS WHEN THE KEYPAD IS LOCKED OUT OR BUSY

2 pages332.46 Kb

AM-KPI
- Access Control Keypad
  - 3. OPEN THE KEYPAD 4. CUSTOMIZE THE BEZEL (OPTIONAL) 5. INSTALL WALL BOX & MOUNTING PLATE
  - Installation Instructions
    - 1. INTRODUCTION
    - 2. KEYPAD FEATURES
    - 6. ROUTE THE CABLE 7. CONNECT THE CABLE & SET THE DEVICE ADDRESS 8. MOUNT THE KEYPAD
    - 9. PROGRAM THE SYSTEM 10. TEST THE KEYPAD LINEAR LIMITED WARRANTY
    - FCC NOTICE
      - PCLK
      - DVAL
      - DAT0
      - DAT1
      - PWRGND
      - 1
      - O
        HOMERUN WIRE FROM THE AM/II TO EACH KEYPAD'S LOCATION (1000 FEET WIRE MAXIMUM ALLOWED IN THE SYSTEM)
      - B
      - TO PROTECT THE KEYPAD FROM STATIC DISCHARGES, BE SURE EARTH GROUND IS CONNECTED TO THE AM/II CONTROL
    - 2CAUTION
      - ARROW ON SWITCH SLOT POINTS TO THE NUMBER
        HOOK THE KEYPAD ASSEMBLY ONTO THE MOUNTING PLATE
        INSTALL THE TWO SCREWS
        FIT THE BOTTOM TAB OF THE FACEPLATE INTO THE SLOT ON THE KEYPAD
        SNAP THE TOP OF THE KEYPAD INTO PLACE
      - THE YELLOW INDICATOR LIGHTS WHEN THE KEYPAD IS LOCKED OUT OR BUSY

Also you can find more Linear manuals or manuals for other Household Appliance.