Main
AV SURROUND RECEIVER
AV- N W 5 0
ENGLISH
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
PRECAUTIONS
Installation
TABLE OF CONTENTS
SOUND
RADIO RECEPTION
DOLBY SURROUND AND DTS SURROUND
TIMER
CONNECTIONS
Before connecting the AC cord
IMPORTANT
Plug in the AC power cord to the AC power socket after all other connections are made.
Video equipment connections
DVD PLAYERS CONNECTIONS
u
CONNECTING SPEAKERS 1
Speaker terminals
Screw type (FRONT SPEAKERS A)
Flap type (FRONT SPEAKERS B, SURROUND SPEAKERS and CENTER SPEAKER)
Jack type (SUB WOOFER)
CONNECTING THE SUPPLIED ANTENNAS 3
To stand the AM loop antenna on a surface
To position the antennas
POSITIONING THE SPEAKERS
When not connecting the sub woofer
ABOUT THE REMOTE CONTROL
Inserting batteries
Important
To use the function printed above the button in orange
To select the function with the remote control
BEFORE OPERATION
To turn the unit on
Press POWER 6STANDBY/ON (POWER).
To change the brightness level of the display
Press DIMMER (hold down SHIFT and press DISPLAY) repeatedly.
CUSTOM AUDIO ADJUSTMENT
VOLUME CONTROL
Left and right balance of the front and surround speakers (except in 5.1ch IN function)
Muting the sound temporarily
BASS AND TREBLE (except in 5.1ch IN function)
SELECTION OF AUDIO/VIDEO SOURCE
1Turn FUNCTION to select the program source.
To select with the remote control
2Start the selected program source. 3Adjust the sound.
SELECTION OF VIDEO SOURCE
RECORDING AN AUDIO SOURCE
MANUAL TUNING
RADIO RECEPTION
PRESET TUNING
MANUAL PRESETTING
1Tune in the desired station. 2Press ENTER to store the station.
3Repeat steps 1 and 2 to store other stations.
AUTOMATIC PRESETTING
ADJUSTMENTS
To switch to monaural FM reception
When the reception contains noise interference
To switch the AM tuning interval
DOLBY SURROUND AND DTS
TURNING SURROUND ON AND OFF
Check the followings:
3Play the surround source by the connected equipment.
SETTING SPEAKER SIZE AND DISTANCE
Default settings
3When the item to be adjusted is displayed, press ENTER.
4Within 6 seconds, turn MULTI JOG to adjust the size (or distance, frequency), and press ENTER.
Selectable sizes, distances and frequencies [Front speakers]
ADJUSTING SPEAKER LEVEL BALANCE
3Adjust the sound level of the centre and surround speakers.
4Press MANUAL SELECT again to stop the noise signal.
About the channels
CHANGING SPEAKER VOLUME TEMPORARILY
OTHER SETTINGS
ADJUSTING LOW FREQUENCY SOUND EFFECT (LFE)
1Press MANUAL SELECT on the remote control.
2Press JOG + or - to adjust the LFE level.
ADJUSTING DYNAMIC RANGE
SETTING THE SLEEP TIMER
1Hold down SHIFT and press SLEEP on the remote control.
2Within 6 seconds, press JOG + or - repeatedly to set the sleep timer duration.
To check the remaining time until the unit turns off
To cancel the sleep timer
SPECIFICATIONS
FM tuner section
AM tuner section
Amplifier section
General
PARTS INDEX
On the unit
On the remote control