Aiwa AV-NW50 manual About The Remote Control, Operating Other Equipment

ABOUT THE REMOTE CONTROL

Inserting batteries

Open the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.

•Replace the batteries with new ones when the operational distance between the remote control and the main unit becomes shorter.

•Remove the batteries if the unit is not going to be used for an extended period of time.

•The remote control may not operate if it is used under intense sunlight or if its line of sight is obstructed.

Important

ENTER on the remote control substitutes for ENTER on the main unit when the function is FM or AM. In other

functions, this button is mainly for operating the DVD player.

To use the function printed above the button in orange

Hold down SHIFT and press the button.

To select the function with the remote control

Press FUNCTION repeatedly. The function changes cyclically.

OPERATING OTHER EQUIPMENT

This remote control allows you to operate other equipment besides this receiver by inputting the brand code.

FUNCTION

0-9 VIDEO1,

VIDEO2,	TUNER
DVD,CD,
CABLE/SAT.,
TV
SHIFT

Operating other equipment

Press the corresponding source button you want to operate. The remote control goes into the corresponding source operation mode.

Some brands have plural brand codes.

After setting a brand code, check whether the remote control functions correctly or not by pressing basic operation buttons such as POWER, c and s. If not, try to set other codes.

To operate this receiver after operating other equipment,

press TUNER to restore the normal mode.

NOTE

•The remote control may not correspond to all the models of the brand shown at the end of the operating instructions.

•Some buttons on the remote control may not work exactly.

•When the batteries are removed, all the settings stored in memory may be lost.

Setting the brand code

Before operation, check the brand code of your equipment. Brand code is shown at the end of the operating instructions.

1Turn on the equipment to be operated with the remote control.

2Hold down the corresponding source button (VIDEO 1, VIDEO 2, TV, DVD, CD or CABLE/SAT.) and press the numbered buttons 0-9 to input the three-digit brand code.

3Release the corresponding source button.

8 ENGLISH