BEFORE OPERATION
Turning on the front speaker system A and/or B
To turn on the front speaker system A: press FRONT SPEAKERS A so that "3A" is displayed. To turn it off, press it
POWER 6STANDBY/ON
POWER
INPUT MODE
again.
To turn on the front speaker system B: press FRONT SPEAKERS B so that "3B" is displayed. To turn it off, press it
FRONT SPEAKERS A,B
DISPLAY
SHIFT
INPUT MODE
DIMMER
PHONES
again.
Both systems can be turned on at the same time.
NOTE
•The front speaker system B is for use of 2 channel stereo system only. When turning on the front speaker system B:
-surround mode or DSP mode is automatically canceled and cannot be turned on.
-" (sub woofer off) " mode is selected automatically.
•The front speaker system A & B are connected in series.
So the sound cannot be heard if the both speaker systems are turned on when only one speaker system is connected.
PREPARATIONS
To turn the unit on
Press POWER 6STANDBY/ON (POWER).
The STANDBY/ON indicator lights in green.
Operation is possible after four seconds. The volume level and function name are displayed one after the other for the first eight seconds.
To change the brightness level of the display
Press DIMMER (hold down SHIFT and press DISPLAY) repeatedly.
The dimmer mode changes as follows.
DIMMER 3 (No display)
DIMMER 1: The illumination of the display is dimmer than usual.
DIMMER 2: The illumination of the display is dimmer.
DIMMER 3 (no display): Everything on the display is cleared.
NOTE
While in the mode other than
Note that "DIMMER" is displayed for one second before everything is cleared when the previously set level is "no display".
Using the headphones
Connect headphones with a standard stereo plug (ø6.3 mm) to the PHONES jack. Be sure to turn off the speakers by pressing FRONT SPEAKERS A and/or B. Otherwise sound is output from the speakers.
To turn the unit off, press POWER 6STANDBY/ON (POWER). The STANDBY/ON indicator turns to red.
SOURCE DIRECT FUNCTION
You can cancel all the sound adjustments (except the volume), with their settings kept in memory, to listen to the original source sound.
Press INPUT MODE once so that " " is displayed.
To restore the sound adjustments, press it repeatedly to display
" " or " ".
• This function is not activated with the TUNER (FM or AM) and 5.1ch IN functions or with the " (front speaker small)" mode.
•When the source direct function is activated:
-SURROUND, DSP, BASS and TREBLE do not function.
-" (sub woofer off) " mode is selected automatically.
See the next page for the sound adjustments.
En
ENGLISH 9