Wireless Connection Model 100SW only

Requires a computer with 802.11b wireless adapter installed

Note: If you use a 2Wire wireless adapter for wireless networking, the HomePortal Setup Wizard software automatically configures it to communicate with the HomePortal during setup, but you will need to install the driver. See Appendix A for detailed installation instructions.

If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter of choice to communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for detailed configuration instructions.

1.Install your wireless adapter according to the manufacturer’s instructions (see note above).

After your adapter is successfully installed, repeat Step 3 “Install the HomePortal Software” on page 15.

20

Page 24
Image 24
2Wire manual Wireless Connection Model 100SW only