In order to output the image (RGB image) from RCA Video output (yellow) when performing navigation, switching the image output is required.

1.Park your car in a safe place, and pull the side brake.

2.Turn the power of the main unit off (cut off the engine).

3.While pressing (AUDIO) button on the bottom left of the numeric keypad of the Remote Controller, turn the ACC on

(start the engine). Keep pressing the (AUDIO) button until the image is displayed on the screen.

Image output is switched, as the image of the navigation (RGB image) is output from RCA Video output, and the image is displayed on the screen.

Display with RCA input jacks

Voice Guidance Speaker with infrared sensor < ex.CD-TS36 > (Sold Separately)

To Audio input

To Video input

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

10

Page 11
Image 11
2Wire AVIC-9DVD installation manual To Video input