Connecting the System
Connecting the power cord (2)
This product
Note:
Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function.
Power cord
Black
To car (metal) body. To keep electromagnetic noise from the car body out of the navigation system, attach this lead near the main unit.
Note: When replacing the fuse, be sure to use only a fuse of the rating prescribed on the fuse holder.
Fuse holder (7.5 A)
Fuse resistor
Fuse resistor
Note: The yellow, red, and orange/white leads should be connected to the opposite side of the fusebox terminals from the battery.
Yellow
To the terminal always supplied with power regardless of ignition switch position.
Red
To the electric terminal controlled by the ignition switch (12 V DC) ON/OFF.
Do not connect this lead to power source terminals to which power is continuously supplied. If the lead is connected to such terminals, the battery may be drained.
Orange/white
To lighting switch terminal.
Yellow/black, Purple/white, Pink, Lightgreen
See pages
13
