Removing and Installing Parts 63
Back View
1power connector Insert the power cable.
2voltage selection switch (may
not be available on all
computers)
See the safety instructions located in the Product Information
Guide for more information.
3parallel connector Connect a parallel device, such as a printer, to the parallel
connector. If you have a USB printer, plug it into a USB
connector.
4diagnostic lights (4) Use the lights to help you troubleshoot a computer problem
based on the diagnostic code. For more information, see
"Diagnostic Lights" on page49.
5mouse connector Plug a standard mouse into the green mouse connector. Turn
off the computer and any attached devices before you connect
a mouse to the computer. If you have a USB mouse, plug it
into a USB connector.
2
1
3
15
16
14
7
5
9
20
18
6
10*
17
19
4
11
*Not present on all computers.
8*
13
12*