14 CHAPTER 2: INSTALLING THE NETWORK DRIVER
13 When prompted, enter the path to the Windows NT
installation files (for example, D:\I386 on the NT CD)
and click Continue.
On some notebooks, you may be prompted for NT files
again when files from LAN Installation Disk 1 are required.
If the files in the NT folder are still not found, enter the path
to the floppy drive (for example, a:\) and click Continue.
14 In the 3Com Megahertz LAN PC Card dialog box,
enter the Network settings for the PC card and click
Continue.
Select the settings appropriate for your card. In most cases
the default settings will work, but if you are unsure about
what settings to use ask your system administrator or MIS
department.
15 If you selected TCP/IP and have a DHCP server, click Yes.
16 If you do not have a DHCP server, click No and get an IP
address from your system administrator and enter it.
Windows NT files are copied to the hard drive.
17 If you are prompted for TCP/IP information, enter it
and click OK.
The Network Setup Wizard shows a Bindings list.
18 Click Next to continue.
19 Click Next to allow Windows NT to start the network.
The Domain/Workgroup Settings window appears.
20 Select the appropriate domain or workgroup name
for Windows Networking and click Next.
21 Click Finish to exit the Network Setup Wizard.
22 Remove LAN Installation Disk 1 from the floppy drive
and click Yes to restart the PC.