20 CHAPTER 2: INSTALLING THE NETWORK DRIVER
5 Press Enter.
An Operating System selection screen appears.
6 Select AutoLink for DOS, Windows 3.x, or WFW 3.11.
Several messages appear while the AutoLink program is
running. A final message indicates successful installation.
If problems occur only when the AutoLink program runs,
view or print the AUTOLINK.LOG file (located in the C:\
directory) to see problems listed in the file.
■To display the file, type:
type autolink.log | more [Enter]
■To print the file, type:
print autolink.log [Enter]
7 When prompted, remove LAN Installation Disk 2 and
reboot the PC.
When prompted, type your user name and password.
Installing the Windows CE 2.0 Driver
The following Windows CE hand-held PCs support the LAN
PC Card using the United States Windows CE 2.0 driver:
■Cassiopeia Model # A11 & A20 (SH3 CPU)
■LG Phenom (SH3 CPU)
■Sharp Mobilon Model # HC4100 (MIPS CPU)
■Phillips Velo Model # 500 (MIPS CPU)
■Compaq C-Series (MIPS CPU)
■NEC MobilePRO 750C (MIPS CPU)
To install the driver, see the WINCE.TXT file on LAN
Installation Disk 1 in the WIN_CE directory.