Site Survey Edit Menu 11
Site Survey Edit Menu The Site Survey utility Edit menu contains Site Survey, Area, and Settings
Use these menus to edit an open AirConnect site survey, display a list of coverage areas within the survey, and use the Setup, Meter Settings, Sounds and Logging property pages to configure surveyor, system sounds, and test data logging information.
Editing Site Survey Select Site Survey in the Edit menu to display the Site Survey dialog box. Use Information the Site Survey dialog box to enter the site name, surveyor, and description. If a
workspace is already open, the user is prompted to save the existing workspace. Click OK to display the new workspace name.
Surveyor. Enter the surveyor name in the Surveyor field to automatically update the New Site Survey dialog box. Click OK to save the updated surveyor name in the registry for subsequent surveys.
ICMP Host Addr. Enter an ICMP Host Address in the field provided (not needed for WNMP ping tests). The default address is the default address of the AP.
Ping Count. Enter the number of pings to be transmitted during the ping test in the Ping Count field. The default Ping Count is 100, with a maximum of 2000.
Rerun Count. Enter the number of times the ping test is transmitted in the
Rerun Count field. The default Rerun Count is 100. The rerun can be continuous
Packet Size. Enter the packet size transmitted during the ping test in the Packet
Size field. The default Packet Size is 128 bytes, with a maximum of 1472 bytes.
Threshold Time. Enter the maximum acceptable time to send out and receive the total number of pings for each test in the Threshold field. Choose a Threshold Time from1 second to 3600 seconds. The default Threshold Time for 100 pings is 13 seconds.
Auto Rerun. If Auto Rerun is activated, the Site Survey utility test suite (in either
Automatic or Manual mode) runs continually until the surveyor stops the tests.
Editing Site Survey Select Area in the Edit menu to display the Site Survey Area List dialog box. Use Area Properties the Site Survey Area List dialog box to display a list and description of survey areas.
Select an area and click Edit Area to display the Site Survey Area dialog box. Add new tests and survey area descriptions as needed. Click OK to save the changes to the site survey workspace. Click Delete to remove the area from the current site survey workspace.
