DUA1840-0AAA01
3-26
C
H
A
P
T
E
R
3:
S
W
I
T
C
H
C
O
N
F
I
G
U
R
A
T
I
O
N
Initializing the Switch 1005
This screen allows you to perform a reset as desc ribed in the previous
section, and in addition, returns non- volatile data stored on the unit to
its factory defaults. Note that the IP address is not cleared. You should
only initialize the Switch 1005 if:
■
The configuration of the device no longer suits your network.
■
Other efforts to solve problems have not succeeded.
To initialize the Switch:
1
From the Main Menu, select the INITIALIZE option.
The Initialization screen appears as shown in
Figure 3-11
.
2
Select OK.
Figure 3-11
Initialization screen
CAUTION:
Use Initialize with great care. The Switch 1005 configuration
is cleared from memory and cannot be recovered. After initialization, all
user information is lost and only default users are available. All ports are
set to their default values, and are therefore enabled and available to all
users. When initializing the Switch, take particular note of the following:
■
Network loops will occur if you have set up resilient links. Before initializing
the Switch, ensure you have disconnected the cabling for all your standby
links.