Verifying Successful Installation

11

10Remove EtherDisk diskette 2 from drive A, and then click Yes to restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to the next section, “Verifying Successful Installation,” to confirm that the NIC is properly installed.

After Windows restarts, double-click the Network icon in the Windows Control Panel and make sure that the configuration settings are properly configured for your network environment. Contact your system administrator for assistance.

Verifying Successful Installation

To verify that the NIC and its software are properly installed on a PC running Windows 95 or Windows 98:

1Open the Windows Start menu, select Settings, and then select Control Panel.

2Double-click the System icon.

3Select the Device Manager tab.

4Double-click Network adapters and make sure that the name of the NIC appears.

If a red X or a yellow exclamation point (!) appears next to the name of the NIC, the installation was not successful. See “Troubleshooting the Installation” and “Frequently Asked Questions” in Chapter 5 of the user guide for troubleshooting help.

Page 11
Image 11
3Com 100 PCI manual Verifying Successful Installation