3Com 100 PCI manual If the New Hardware Found dialog box appears

8ETHERLINK 10/100 PCI FOR COMPLETE PC MANAGEMENT NICS QUICK GUIDE

If the New Hardware Found dialog box appears:

aSelect Driver from disk provided by hardware manufacturer, and then click OK.

bInsert EtherDisk diskette 1 in drive A, make sure that A:\ appears in the entry box, and then click OK.

cGo to step 2 when prompted for EtherDisk diskette 2.

If the Update Device Driver Wizard starts:

aInsert EtherDisk diskette 1 in drive A, and then click Next.

Windows finds the driver and asks if you want to use this driver.

bClick Finish, and then click OK when prompted for EtherDisk diskette 1.

cGo to step 2 when prompted for EtherDisk diskette 2.

2Remove EtherDisk diskette 1 from drive A, insert EtherDisk diskette 2, and then click OK.

Files are copied.

■If this is the first time that networking is being installed on your PC, the Identification tab of the Network screen appears. Go to step 3.

■If networking has already been installed, you are prompted for the Windows 95 CD. Go to step 4.

3In the specified fields of the Identification tab screen, enter the following information, and then click OK:

■Computer Name — Identifies the PC on the network for other users. This entry must be a unique name of 15 characters or fewer, containing no spaces.

■Workgroup — Identifies the group (for example, your department name) to which your PC belongs. If you belong to a peer-to-peer network, this entry must be exactly the same for all the PCs in your network.

■Computer Description — Displays additional details to other users on the network about this PC. For example, you could specify that the PC has a printer attached. Filling in this field is optional.