10ETHERLINK 10/100 PCI FOR COMPLETE PC MANAGEMENT NICS QUICK GUIDE
To install the NIC driver and software on a PC running Windows 98:
1Turn on the power to the PC.
Windows 98 detects the NIC. The Add New Hardware Wizard starts.
2Insert EtherDisk diskette 1 in drive A, and then click Next.
3Select Search for the best driver for your device (Recommended), and then click Next.
4Select Floppy disk drives, and then click Next. Windows finds the driver file for the device.
5Click Next.
If the Insert Disk dialog box appears, prompting you to insert EtherDisk diskette 1, click OK.
Files are copied. You are prompted for EtherDisk diskette 2.
6Remove EtherDisk diskette 1 from drive A, insert EtherDisk diskette 2, and then click OK.
Files are copied. You are prompted for the Windows 98 CD.
7Insert the Windows 98 CD or diskette, and then click OK.
If you do not have the Windows 98 CD or diskette, but the Windows 98 installation files are on your hard drive, click OK. Enter the directory in the Copy Files From entry box (usually C:\WINDOWS\OPTIONS\CABS), and then click OK.
Files are copied. You are prompted for EtherDisk diskette 2.
8Make sure that EtherDisk diskette 2 is in drive A, and then click OK.
Files are copied.
9Click Finish.
You are prompted to restart the PC.
