MODEM INSTALLATION WITH WINDOWS 95
28
This means the installation was a success.
Click OK.
NOTE: If you do not see your
modem listed in the preceding
screen, the Plug and Play installation
was unsuccessful. Please refer to
“When Plug and Play Fails” on page
95.
6. Next, click the Diagnostics tab at the top
of the “Modems Properties” screen. Write
down the COM setting for your modem.
(NOTE: Your screen may show a different
setting than that shown in the following
screen.) You will need to know this setting
when you install RapidComm Voice.
Turn to “Software Installation and Testing”
(page 33) for detailed information about
installing RapidComm Voice, registering the
modem, and trying out your modem by
faxing U.S. Robotics.