INSTALLING OTHER FAX/DATA SOFTWARE
52
Your modem was designed for and tested
using a wide range of communications software
packages. This section will guide you through
some of the details you may need to know
when installing communications software
packages other than RapidComm Voice
(included on the Connections CD-ROM).

Type of Modem

Most communications software programs will
ask you to select the type of modem you are
using. Select a U.S. Robotics Sportster high
speed modem. If that selection is not listed,
pick Courier Dual Standard, V.32bis, or V.
34.

Initialization String

For hardware flow control, a fixed serial port
rate, and full result codes, type AT&F1 and
then press ENTER. If you must use software
flow control, type AT&F2 and then press
ENTER.

Flow Control

For hardware flow control (highly
recommended), select RTS/CTS. For
software flow control, select XON/XOFF.
You may need to disable the flow control
(hardware or software) that you are not using.