Accessing the Wizard 31
PPPoE Mode
Figure 15 PPPoE Interface Screen
To setup the Router for use with a PPP over Ethernet (PPPoE) connection,
do the following:
1Enter your PPP over Ethernet user name in the User Name text box.
2Enter your PPP over Ethernet password in the Password text box and
enter it again in the Retype Password text box.
3If required, enter your PPP over Ethernet service name in the Service
Name text box. This is optional. Not all ISPs require a PPPoE service name.
Do not enter anything in this box if your ISP does not require a service
name.
4Enter the MTU value supplied by your ISP in the MTU text box. If your ISP
has not supplied an MTU value, leave this at the default value. The
default is 1454.
5Check all of your settings, and then click Next. The DNS screen displays
Refer to “DNS” on page page 35.