SNMP 71
■Select either Network or Host as the local type setting.
■Enter the Remote Server IP address in the text box.
8If you want to enter details of the remote network, check the Remote
Network Setting - Enable check box, then enter the Remote Network
Address and Remote Subnet Mask.
9Click Apply to save the settings.
SNMP SNMP (Simple Network Management Protocol) allows remote
management of your Router by a PC that has an SNMP management
agent installed.
You can configure the following SNMP parameters:
■Community — This configures the SNMP community string, which
authenticates remote users.
■Trap — You can also configure the Router to send status messages to
the SNMP management agent if a problem occurs on the network.
This is done by using Traps.
To set up SNMP Community and Trap parameters, do the following:
1Select SNMP from the main menu. The SNMP screen displays (Figure 48).
Figure 48 SNMP Screen
2Select Enable to activate SNMP.