70 CHAPTER 5: ROUTER CONFIGURATION
11 Type a name for the Remote Party ID in the text box next to the
drop-down list. This must be unique for each connection rule that you
create.
12 Click Apply to save the settings.
Adding a PPTP
Connection
To add a PPTP Connection, or to edit an existing PPTP connection:
1In the VPN screen, click Add, or click Edit to edit an existing connection.
2At the Tunnel Type drop-down list, select PPTP. The screen shown in
Figure 47 displays.
Figure 47 VPN Tunnel Configuration - PPTP Screen
3Enter a name for the tunnel at the Tunnel Name text box.
4Enter the user name that the remote VPN client will use to connect in the
User name text box.
5Enter the password that will need to be supplied to connect in the
Password text box.
6Typ e in an Idle Timeout. This is the amount of time, in minutes, that you
want the connection to remain inactive before it times out. Enter 0 if you
do not want the connection to timeout.
7Select either the PPTP Server or PPTP Client radio button. If you select
PPTP Client, enter the following information:
■Check the Auto reconnect check box if you want to re-connect
automatically after the PPTP session ends or is dropped.