![](/images/new-backgrounds/1306470/30647055x1.webp)
28Upgrade your Switch to the Latest Software
Running a New | This sections describes how to run software that you have uploaded to |
Software Image | the switch. To put the software image into your switch, see “Loading |
| Software into the Switch” on page 27. |
| To run new software, you must set the image to become active after the |
| switch is reset. The Active Image tab identifies which image is currently |
| active and which image will be used after the next reset. |
| To select new software to run: |
1Select Administration
The Active Image field displays the name of the software image currently in use (either Image 1 or Image 2).
2Set the Active Image After Reset field to the other software image. For example, if Active Image displays Image 1, set Active Image After Reset to Image 2.
3Reset the switch by selecting Administration