■ The switch is situated away from sources of conductive (electrical) dust, for example, laser printers.
| ■ The unit is installed in a clean, air conditioned environment. |
| ■ The AC supply used by the switch is separate to that used by units |
| that generate high levels of AC noise, for example, |
| units and laser printers. |
| ■ No more than eight Switch units are placed on top of one another, if |
| the units are |
|
|
| The Switch 4200 Family are 1U high and will fit in most standard |
| racks. |
| CAUTION: Disconnect all cables from the Switch before continuing. |
| Remove all self adhesive pads from the underside of the Switch if they |
| have been fitted. |
| To |
| 1 Place the Switch the right way up on a hard flat surface, with the front |
| facing towards you. |
| 2 Locate a mounting bracket over the mounting holes on one side of the |
| Switch, as shown in Figure 5. |
