3Com DIGITAL MODEM manual Installing and Configuring the Digital Modem

2-8 CHAPTER 2: INSTALLING AND CONFIGURING THE DIGITAL MODEM

Click Connect. The 3Com Impact Configuration dialog box appears, as shown in Figure 2-3.

Figure 2-3 Configuration Dialog Box

A status bar below the Help, Tools, Configure, and Exit buttons provides the following ISDN status information:

■Layer 1 status

■Service Profile Identifier (SPID) for telephone numbers 1 and 2

■Terminal Endpoint Identifiers (TEI) 1 and 2 (for information purposes only)

A message bar at the bottom of the dialog box provides help for completing the fields. If you click in a field, the message bar tells you what information to enter in the field.The message bar also provides status information about the digital modem. If the digital modem is disconnected from the ISDN telephone line, for example, a message indicates this condition.

The right side of the dialog box shows the digital modem software version, along with any installed options (such as Multilink PPP or internal analog fax modem).