Chapter 1 Page 5
Installing the Batteries
To use your Palm III organizer, you must install two AAA alkaline
batteries. The batteries fit behind the b a ttery door on the back of the
Palm III organizer.
To install the batteries in your Palm III:
1. Press the latch on the battery door and lift the battery door away
from the Palm III organizer.
2. Install the two AAA alkaline batteries supplied with your Palm III
organizer into the battery compartme nt.
Contrast
control Adjusts the appearance of the screen for the
clearest screen display. Depending on the
lighting conditions or temperature of the
environment where you use your Palm III
organizer, you may need to adjust the setting
of the contrast control.
Battery door Covers the batteries that power your Palm III
organizer. See “Installing the Batteries” for
information on remo ving the battery door and
installing batteries.
Serial port door Protects the serial port that fits into the
connector of the Palm III organizer cradle to
ensure that the connection surf ace of the s eri al
port remains clean and clear o f debr is.
Press tab
to open