104 CHAPTER 8: USING THE VCX USER INTERFACE
■Groups
■Hunt Groups — Allows you to view the hunt groups you belong
to and your current login status for each group. See Hunt Groups.
■Page Groups — Allows you to view the page groups configured
on your system. When you dial the group page extension, speakers
are activated on the telephones that are members of the group. As
you speak into your handset, your voice is broadcast on the
activated speakers. See Paging.
■Call Pickup Groups — Allows you to view the call pickup groups
you belong to and the other members of these call pickup groups.
See Call Pickup.
■Log Out — Ends your VCX User Interface session. See Logging Out.
Enabling Call Forwarding This section describes how to enable and use call forwarding features set
up through the VCX User Interface.
You can also configure and enable call forwarding through your phone’s
Telephone User Interface (TUI). See Call Forwarding.
You can use the VCX User Interface to set:
■How long (in seconds) your telephone rings before the system
forwards unanswered calls
■Where you want your call to be forwarded
■The condition (or conditions) that result in the system forwarding a
call:
■Ring No Answer — Redirect incoming calls to another destination
when your phone rings for a configured time period (the default is
15 seconds).
■Busy Line —Redirect incoming calls to another destination when
your phone is busy. If you have multiple lines, busy means that all
lines are in use.
■All Calls — Redirect incoming calls to another destination
unconditionally. Use this feature when you plan to be away from
your phone for an extended period of time. Also referred to as Call
Forward Universal.
■Fall Back — Return forwarded calls to your call coverage point if
the forwarding destination does not answer. When you enable this