76 CHAPTER 7: STANDARD FEATURES
To transfer a call to another subscriber’s voice mail:
1While on a call, press Feature +441.
The Display Panel shows the following prompt:
Transfer VMail Number:
2Enter the extension of the subscriber whose mailbox will receive the call.
The caller hears the mailbox greeting of the target subscriber but the
subscriber’s phone does not ring.
Alternatively, you can use the following procedure:
1While on a call, press Transfer.
2Enter the transfer to another subscriber’s voice mail feature code in the
following format:
*441*<extension>
For <extension>, you can either enter the phone extension of the
recipient, press a speed dial button mapped to that extension, or press a
bridge line button (Basic phones do not support bridging) mapped to that
extension.
3Press the Transfer button again, then hang up.
For example, extension 1001 calls extension 1000. Extension 1000 wants
to transfer the call to the voice mailbox of extension 1002. In this case,
extension 1000 performs the following steps:
Presses Transfer.
Enters *441*1002.
Presses Transfer.
Hangs up.
Extension 1001 now hears the voice mailbox greeting for extension 1002
but extension 1002 does ring.
Call Waiting The Call Waiting feature in the VCX User Interface allows you to select a
ring tone, or to hear a beep sound in the handset/headset, or to disable