To access and use the Web configuration management system, you need a computer that is running Internet Explorer 5.0 or newer and one of the following operating systems: Windows 98, Windows ME, Windows NT 4.0 Service Pack 6, Windows 2000, or Windows XP. It is recommended that this computer become the dedicated workstation for managing and configuring the access point and the wireless network.
POWER REQUIREMENTS
The access point complies with the IEEE 802.3af
IEEE 802.3af compliant power supply equipment (output power rated 48 V dc @ 350 mA maximum). Such equipment must be safety certified according to UL, CSA, IEC or other applicable national or international safety requirements for the country of use. All references to the power supply in this document refer to equipment that meets these requirements.
Because the power supply plug is the only means of disconnecting the access point from power, make sure the power outlet is accessible.
See “Using an Optional
Note for use of the 3Com power supply (part number
SAFETY INFORMATION
This equipment must be installed in compliance with local and national building codes, regulatory restrictions, and FCC rules. For the safety of people and equipment, only professional network personnel should install the access point, cables, and antennas.
CAUTION: If you supply your own Ethernet cable for connecting power, be sure
!that it is category 5
CAUTION: To comply with FCC radio frequency (RF) exposure limits, a minimum
!
12