Symptom | Solutions | |
|
| |
| To maintain wireless association, the service area and the | |
| security settings on the client and the access point must | |
| match exactly. Therefore, if you are associated with the | |
| access point that you are configuring and you change | |
| the access point service area or security, make sure to | |
| change the client service area to match. | |
While you are configuring | If you change the IP address and save the change, you | |
cannot continue to configure the access point using the | ||
the access point, the | ||
old IP address. Therefore, if you want to continue | ||
Configuration Management | ||
configuring this access point after you save this change, | ||
System stops responding. | ||
you must do the following: | ||
| ||
| 1 Close your browser. | |
| 2 Return to the 3Com Device Manager Wireless | |
| Network Tree and click Refresh. | |
| 3 Select the access point and click Configure to start a | |
| new configuration session. | |
|
| |
The access point cannot be | Reset the access point (push the reset button located | |
configured using the Web | ||
near the access point LEDs). | ||
browser. | ||
| ||
|
|
65
