SNMP TARGETS
This table is used to select the management targets for receiving notifications, as well as the type of notifications that should be sent.
Target ID—The name that identifies the target.
IP Address—The IP address of the target.
UDP port—The UDP port number of the target.
SNMP user—The SNMP user for the target.
Filter ID—Assign a filter ID from the Filter List to the target.
Action—Click Add to add an entry; click Delete to remove an entry.
SNMP FILTER
This table is used to set filter profiles. Filter profiles are used to determine if particular management targets should receive certain notifications.
Filter ID—The name used to identify the filter.
Filter Type—Indicates whether or not the family of filter subtrees that are defined by this entry are included in or excluded from a filter.
Subtree—The MIB subtree that defines a family of subtrees which are included in or excluded from the filter profile.
Action—Click Add to add an entry; click Delete to remove an entry.
