11
b
z
x
c
v
z
x
c
b
v
q
w
e
r
t
y
Threading the Machine
To set the needle thread:
Raise the thread take-up lever to the highest
position by turning the handwheel.
Raise the presser foot.
zDraw the thread from the spool and pass it
under the thread guide. Then draw it down
along the right channel.
qThread guide
wRight channel
xDraw the thread up around the bottom of the
thread guide plate.
Pull the thread up along the left channel
eThread guide plate
rLeft channel
cFirmly draw the thread from right to left over
the thread take-up lever and down into the
take-up lever eye.
tThread take-up lever
vDraw the thread down along the left channel
and slip the thread behind the needle bar
thread guide from the left.
yNeedle bar thread guide
bPass the thread through the needle eye from
the front or use the needle threader (refer to
the next page).