4

r

t

q

ew

Free-arm sewing
Free-arm sewing is used for stitching sleeves,
waistbands, pant legs or any other tubular
garments.
It is also useful for darning socks or mending knees
or elbows.

Connecting the Power Supply

zTurn the power switch off.
xInsert the machine plug into the machine
socket.
cInsert the power supply plug into the wall
outlet.
vTurn the power switch on.
qPower switch
wMachine plug
eMachine socket
rPower supply plug
tWall outlet
NOTE:
Before connecting to the power supply, make
sure the voltage shown on the machine
conforms to your electrical power.
SECTION 2. GETTING READY TO SEW
WARNING:
While in operation, always keep your eyes on
the sewing area, and do not touch any moving
parts such as the thread take-up lever,
handwheel or needle.
Always turn off the power switch and unplug
from the power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control,
otherwise the machine will run intermittently.

Operating Instructions:

The symbol "O" of a switch indicates the "off"
position of a switch.
For an appliance with a polarized plug (one blade
wider than the other):
To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way.
If it does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
modify the plug in any way.
The foot controller Model YC-482J or TJC-150 is
used with the sewing machine Model 7318 (USA
market only).